Firefighting Foam Polyfoam B 3-15
AFFF-AR Pseudoplastic foam concentrate 3X3 (-15 ºC), compound for extinction of hydrocarbon and polar solvent fires.
AFFF compound for extinction of hydrocarbon and polar solvent fires. Concentrate with pseudoplastic behaviour. It contains fluorinated and hydrocarbon surfactants in order to allow the formation of an aqueous film on the sur-face of most hydrocarbon fuels, reducing vapour leaks and preventing the contact with the oxygen.
It may be used with low expansion foam equipment (nozzles, monitors, foam chambers, etc), non-aspirating devic-es (water spray nozzles and standard sprinklers) and medium expansion foam branches. On polar solvent fuels use gentle application. 3.
The dilution rate is 3% in fresh or sea water for extinguishing hydrocarbon fires and polar solvent (alcohols, ketones, ethers, esters, amines, etc) fires. It may be proportioned with standard equipment (in-line inductors, bladder tanks, balanced pressure systems, etc) and special purpose ones for AFFF agents (e.g. Hydrofoam nozzles).
The product is supplied in 20 or 25 L PE prismatic containers, 200 L PE cylindrical drums and 1.000 L IBC containers.
The foam achieves a very quick knock-down of fires, even with low application rates, and shows an excellent burn-back resistance. The product fulfils the fire tests requirements according to EN-1568-3:2008 and EN-1568-4:2008 and has approval certification according to the standard “GOST P 50588”.
The concentrate should be stored at temperatures between –15°C and +50°C, preferably in the original containers or in stainless steel or epoxy lined tanks. Avoid permanent contact with carbon steel, iron, cooper alloys, alumini-um, etc. Do not mix with other foam concentrates without a previous verification of compatibility.
Foams should not be used in contact with electrical equipments, neither with chemical products that can react with water. It is recommended to avoid the contact of the foam concentrate with the skin. In case of eye splashes, wash with plenty of water. In case of ingestion do not induce vomit, drink water and take medical advice.
Technical specifications - The typical characteristics of the concentrate and foam solutions are:
|Specific gravity @ 20°C||1.040|
|pH @ 20°C||7.0 - 8.0|
|Viscosity, #4 30 r.p.m. mPa.s @20ºC||1900|
|Viscosity, cone and plate, 375/75s-1 mPa.s @20ºC||70|
|Freezing point, °C||<-15|
|Lowest temp. for use, ºC||- 15 °C|
|Surface tens. at 20°C, mN/m (Demineralised water)||17.0|
|Interfacial tens. with heptane at 20°C, mN/m||2.7|
|Low Expansion Foam (“GOST P 50588”)||-|
|Foam Expansion Index||8.2|
|25% Drainage Time, min:s||8:30|
How can I send a product inquiry?
You can send an inquiry about each product by filling out an inquiry form next to the product. The inquiry form can be found below the product description and technical specifications in the menu entitled "Send product inquiry". Clicking on the + sign opens a query form in which you fill in the information we ask of you as a customer. In the "Message" field you can write additional information that interests you and simply send an inquiry by clicking the mouse on the "Send" field.
By doing so, your inquiry was sent to our e-mail address and our commercial clerks will answer you as soon as possible.
How to send an inquiry for more products?
If you have a list of equipment that contains more than one product, send us an inquiry by placing all the products in the cart first. Next to each product photo, below the title and a brief description of the product, there is a menu for putting more products in the cart. You can also select the desired amount of the same product before placing it in the cart.
Once you have selected the appropriate quantity, click on the "Add to cart" field with the mouse. A window will appear in the upper right corner of your screen where you will see the message "Successfully added to cart". By doing so, you have placed the product in the cart and you can continue to select other products in our Web catalog.
When you have gathered all the products in the cart for which you want to send an inquiry, at the main menu (upper right corner of your screen) click on the field called "Cart". You can also see the number of products you have placed in your cart. In the cart, you can additionally change the quantities of products or remove a product that you do not need.
You send an inquiry for an offer by filling in the information we ask of you as a customer in the inquiry form. In the "Message" field you can write additional information that interests you and simply send an inquiry by clicking the mouse on the "Send" field.
How can I pay for the product?
You can pay for the products from our Web catalog after receiving an offer from our sales department. Our offer contains all the necessary information for payment: product price (excluding VAT), invoice number for payment and company name and address. You can pay for the offer via internet banking or a general payment slip at the nearest post office.
In our sales centers you can buy and pick up the product yourself. We offer you methods of payment by card (Maestro or Visa) and cash payment.
Delivery and delivery of products?
You can pick up all our products yourself in our sales centers throughout the Republic of Croatia: Zagreb, Split, Osijek and Rijeka. For the territory of Bosnia and Herzegovina, you can pick up all the products in the business center in Banja Luka.
We deliver products according to the agreement. Products can be sent to your address as soon as possible via delivery services (GLS, HP Express, Lagermax) or you can arrange transportation yourself. For all listed methods of delivery, additional postage is charged according to the valid price list, the amount of which is stated in advance on the offer with the product.
Delivery of products to your address via delivery services is 2-3 working days, and for islands within 5 - 7 working days. The listed options and delivery deadlines are valid for the territory of the Republic of Croatia, for foreign countries only by agreement.
What if the product has a fail?
If the product you received is having a fail or damaged, please contact us via our e-mail address email@example.com or call the nearest sales center "Vatropromet" where you placed your order. After reviewing the returned product, we will notify you of further steps.
Can the product be replaced?
Product replacement is possible for all products within 14 working days of receipt of the shipment. The product replacement request must be sent together with the product to the address from which you received the shipment (listed on the shipment).
Your message has been sent successfully. Thank you.