More than half of the employees are firefighters
More than half of the employees are firefighters
The largest stock of firefighting equipment in Croatia
The largest stock of firefighting equipment in Croatia
More than 25 years on service to the Firefighters
More than 25 years on service to the Firefighters

Mobile Radio Station Kenwood TK-D740E

4001183
Price on request

VHF DMR Mobile Radio operates in DMR Digital and FM Analogue modes, even on the same channel.

Select quantity
Add to Cart
About product

Introducing the new TK-D740/D840 mobile radio stations with impressive DMR system line-up. Thanks to compliance with MIL-STD and IP54 environmental standards, they can be relied on through thick and thin.

As well as handling both analogue and digital communications, these user-friendly DMR radios can even operate in direct mode, without a repeater. They also offer KENWOOD Call Interrupt and also benefit in having KENWOOD enhanced audio quality. These truly resourceful team members will enable you to make the most of your legacy analogue equipment while also benefitting from digital communications.

Two-slot TDMA

Belonging to the DMR Tier II category, which covers licensed conventional systems, these radios are specified for 2-slot Time Division Multiple Access (TDMA) operation in 12.5 kHz channels. This means they can offer greater spectrum
efficiency.

Two in One - Digital & Analogue

These DMR radios can operate in both digital and FM analogue modes, switching automatically as needed. Interoperability with legacy analogue radios allows organizations to migrate to full digital at their own pace.

Dual-Slot Direct Mode

Up to two simultaneous direct-mode subscriber calls can be supported in a 12.5 kHz channel, without requiring a repeater, thus doubling channel capacity.

Call Interruption

In an emergency or whenever a user needs to interrupt a call, Call Interrupt is available in both direct and repeater modes, while encoding or decoding. Also featured are emergency functions to help protect staff in remote areas, etc.

Tough All-terrain

These TK-D740/D840 mobile radios conform to MIL-STD C/D/E/F/G standards for ruggedness, and are IP54 rated for water & dust intrusion, making them more than capable of withstanding harsh operating conditions. *Applies only when using a microphone KMC-35 or KMC-36.

2-Digit LED Channel Display with Brightness Control

The large 2-digit LED display provides a clear indication of which channel is being used, and the brightness level can be adjusted (high/low) to suit the time of day and ambient light conditions. The front panel also features 9 programmable function keys for enhanced operating ease.

Programmable Blue LED

The blue LED indicator can be customized to provide useful status information. For example, it can be used in combination with the orange LED for Selective Call differentiation.

Clear, Powerful Audio

A radio’s most important quality is clarity – being able to hear, loud and clear, what the other party is saying, and these mobiles deliver just that. For instance, the AMBE+2™ VOCODER technology accurately replicates natural human speech nuances for superior voice quality, even with high levels of ambient noise. Additionally, Voice Announcement can confirm the channel number, so there is no need to look at the display. English is the default language, but Spanish, French, German, Italian, Dutch and Russian are also available. 

5-Tone Signalling

A series of programmed audio tones is used to specify one or more radios and initiate a conversation; all other radios will remain muted. Several signalling formats are available.

Key Features:

TDMA DMR Digital Air Interface - 2 slot/1 carrier in 12.5kHz
Complies with ETSI DMR Standard TS 102 361-1, -2 & -3
Operates in DMR Digital and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue)
2-digit LED Channel Display with Brightness Control
5-Tone Encode/Decode
Voice Guide Function
MIL STD 810 G and IP54
Technical specifications
  • Max. 128 ch in 4 zones (32 ch per zone)
  • Wide 70 MHz UHF coverage
  • 25-5 W Output
  • External D-sub 15-pin (DE-15) interface
  • External speaker connector (3.5 mm diameter phone jack)
  • Audio output power 4 W @ 4 Ω
  • GPS connectivity (future firmware update)
  • Single zone and Normal scanning functions
  • Horn alert/P.A. function
  • Ignition sensing
  • Password protection (read/overwrite)
  • Minimum volume setting
  • Embedded message
  • Selective call alert LED
  • Late entry
  • Analogue signalling: QT/DQT, FleetSync, 5-tone signalling
  • Compander per channel
  • Squelch level

PMR General Features

3-colour LED (Red, Orange, Green) Yes
5-Tone Signalling formats Yes
Busy Channel Lock-out Yes
Compact Design Yes
Ease of Operating Use Yes
Flash Upgradeable Firmware Yes
Lone Worker Function Yes
Programmable Function Keys 3 Programmable Function Keys
QT (CTCSS) / DQT (digital) Yes
Talk Around Yes
Time-Out Timer Yes
Voice Annunciation Yes - Current Channel and Zone, in your choice of English, French, German, Italian, Dutch, Spanish or Russian
Windows PC Programming and Tuning Yes

DMR Features

AMBE+2 Vocoder Yes
Direct Mode (P2P) Yes, Selectable from ETSI newer or older definitions
Individual Call with Acknowledgement Yes
Single-slot Data Timing Yes
TDMA 2-slot System Architecture Yes

Applicable Standards

R&TTE: Yes, EN 300 086-2, EN 300 113-2, EN 300 219-2, EN 301 489-5, EN 300 440-2
EU Safety: EN60065, 60950-1, 60215 Yes
EU Safety: EN62209 Yes
For use in the EU Yes
IP54 Yes
Measurement - EIA Standards Yes
Measurement - EN Standards Yes
MIL-STD 810 C/D/E/F/G Yes

Technical Specifications

Frequency Range 136 - 174 MHz
Number of Channels 128
Number of Zones 4
Channel Spacing - Analogue - Wide/Mid/Narrow 25 kHz/20 kHz/12.5 kHz
Channel Spacing - Digital 12.5 kHz
Antenna Impedance - 50 Ohm Yes
Frequency Stability ± 2 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 13.2 V DC (10.8 - 15.6 V DC)
Dimensions 160 x 43 x 122.6 mm
- Projections not included -
Weight (net) 1.1 kg

Receiver Specifications

Adjacent Channel Selectivity (Analogue) 75 dB at 25 kHz
73 dB at 20 kHz
69 dB at 12.5 kHz
Audio Output 4 W / 4 Ohm
Intermodulation (Analogue) 65 dB
Sensitivity (Analogue) - EN 20 dB SINAD -3 dB µV (0.35 µV) at 25 kHz
-3 dB µV (0.35 µV) at 20 kHz
-1 dB µV (0.45 µV) at 12.5 kHz
Sensitivity (Digital) 5% BER: 0.3 µV/-4.5 dBµV emf
1% BER: 0.45µV/-1 dBµV emf
Spurious Reponse Rejection (Analogue) 75 dB

Transmitter Specifications

RF Power Output (High/Low) 25 W / 5 W
Audio Distortion Less than 5%
FM Noise (EIA) Analogue:
45 dB at 25 kHz
45 dB at 20 kHz
40 dB at 12.5 kHz
Spurious Response (EIA) < 1 GHz ≤ -36 dBm, 1 GHz - 4 GHz ≤ -30dBm

 

Brochure - Mobile Radio Station Kenwood TK-D740E

Frequently Asked Questions
Send a product inquiry

How can I send a product inquiry?

You can send an inquiry about each product by filling out an inquiry form next to the product. The inquiry form can be found below the product description and technical specifications in the menu entitled "Send product inquiry". Clicking on the + sign opens a query form in which you fill in the information we ask of you as a customer. In the "Message" field you can write additional information that interests you and simply send an inquiry by clicking the mouse on the "Send" field.

By doing so, your inquiry was sent to our e-mail address and our commercial clerks will answer you as soon as possible.

Send inquiries for multiple products

How to send an inquiry for more products?

If you have a list of equipment that contains more than one product, send us an inquiry by placing all the products in the cart first. Next to each product photo, below the title and a brief description of the product, there is a menu for putting more products in the cart. You can also select the desired amount of the same product before placing it in the cart.

Once you have selected the appropriate quantity, click on the "Add to cart" field with the mouse. A window will appear in the upper right corner of your screen where you will see the message "Successfully added to cart". By doing so, you have placed the product in the cart and you can continue to select other products in our Web catalog.

When you have gathered all the products in the cart for which you want to send an inquiry, at the main menu (upper right corner of your screen) click on the field called "Cart". You can also see the number of products you have placed in your cart. In the cart, you can additionally change the quantities of products or remove a product that you do not need.

You send an inquiry for an offer by filling in the information we ask of you as a customer in the inquiry form. In the "Message" field you can write additional information that interests you and simply send an inquiry by clicking the mouse on the "Send" field.

Payment methods

How can I pay for the product?

You can pay for the products from our Web catalog after receiving an offer from our sales department. Our offer contains all the necessary information for payment: product price (excluding VAT), invoice number for payment and company name and address. You can pay for the offer via internet banking or a general payment slip at the nearest post office.

Retail

In our sales centers you can buy and pick up the product yourself. We offer you methods of payment by card (Maestro or Visa) and cash payment.

Product delivery

Delivery and delivery of products?

You can pick up all our products yourself in our sales centers throughout the Republic of Croatia: Zagreb, Split, Osijek and Rijeka. For the territory of Bosnia and Herzegovina, you can pick up all the products in the business center in Banja Luka.

We deliver products according to the agreement. Products can be sent to your address as soon as possible via delivery services (GLS, HP Express, Lagermax) or you can arrange transportation yourself. For all listed methods of delivery, additional postage is charged according to the valid price list, the amount of which is stated in advance on the offer with the product.

Delivery of products to your address via delivery services is 2-3 working days, and for islands within 5 - 7 working days. The listed options and delivery deadlines are valid for the territory of the Republic of Croatia, for foreign countries only by agreement.

Product complaint

What if the product has a fail?

If the product you received is having a fail or damaged, please contact us via our e-mail address [email protected] or call the nearest sales center "Vatropromet" where you placed your order. After reviewing the returned product, we will notify you of further steps.

Can the product be replaced?

Product replacement is possible for all products within 14 working days of receipt of the shipment. The product replacement request must be sent together with the product to the address from which you received the shipment (listed on the shipment).

    Submit a product inquiry